If you need to enter Service Program Mode (SP Mode) on the Ricoh MP2553SP, 3053, 3053SP, 3353 or 3353SP, use the key sequence below. This is the standard Ricoh MP 3053 service mode entry used by technicians to reset counters and adjust settings.
How to enter Service Program Mode
- Turn the main power switch ON.
- Press CA (Clear Modes).
- On the keypad, enter 806182.
- Press and hold the C key for about 3–4 seconds until the Service Mode menu appears.
Watch the video
You can watch this procedure in the short video below:
Notes
Service Program Mode is intended for technicians. Only change values you understand, and turn the machine off and on to exit and apply changes.
Frequently asked questions
Which models does this work on?
This entry method works on the Ricoh MP2553SP, MP3053, MP3053SP, MP3353 and MP3353SP series.
What is the code 806182?
It is the entry code you type after pressing CA to unlock Service Program (SP) Mode on these models.
How do I exit SP Mode?
Exit the menu and switch the machine off and on to return to normal operation.