HomeReset GuidesDrum ResetHow to Reset Drum Counter on Brother DCP-L2640DN

How to Reset Drum Counter on Brother DCP-L2640DN

If you are using the Brother DCP-L2640DN printer and you see a message related to the drum unit, such as “Replace Drum” or “Drum End Soon”, it doesn’t always mean that the drum needs immediate replacement. In many cases, you simply need to reset the drum counter. In this guide, we will show you exactly how to reset the drum counter on the Brother DCP-L2640DN quickly and safely.

Why Reset the Drum Counter?

Brother printers track the usage of the drum unit through an internal counter. Once it reaches a certain limit, the printer will display a warning message. However, if you have already replaced the drum unit or you know it is still in good condition, resetting the counter will remove the error and allow normal printing.   Reset Drum Counter on Brother DCP-L2640DN

Step-by-Step: Reset Drum Counter on Brother DCP-L2640DN

  1. Turn on your printer.
  2. Open the front cover of the printer.
  3. Press and hold the “OK” button for a few seconds.
  4. When the reset menu appears, select the drum unit option.
  5. Confirm the reset by pressing “OK”.
  6. Close the front cover.

Your drum counter is now reset, and the error message should disappear.

Watch the Full Video Tutorial

If you prefer a visual guide, watch the full step-by-step video below: https://www.youtube.com/watch?v=0ZPDsROt6Ug

Important Tips

  • Only reset the drum counter if you have replaced the drum or are sure it still works properly.
  • Resetting without replacing a worn drum may result in poor print quality.
  • Always use compatible or original drum units for best performance.

Resetting the drum counter on the Brother DCP-L2640DN is a quick and simple process that can save you time and unnecessary costs. By following the steps above, you can easily fix drum-related errors and continue printing without interruptions.

Frequently asked questions

Does resetting the drum counter fix print quality?

No. Resetting only clears the counter. If prints show lines, smudges or fading, the drum unit itself may still need replacing.

Do I need to reset the drum after every toner change?

No. Reset the drum counter only after you replace the drum unit, not when you change the toner cartridge.

How long does the drum last on the Brother DCP-L2640DN?

The drum unit is rated for roughly 12,000–15,000 pages, depending on print volume and page coverage.

Related guides

Advanced Scan to PDF – Free Download

Advanced Scan to PDF is a simple, ease of use, good, clean, without ads, and without activations scaning program? Scan your documents to PDF format from...

Reset drum counter on BROTHER HL-1112 HL-1118 HL-1111 HL-1110 HL-1212 HL-1210

When the Brother HL-1110 reaches about 10,000 pages it stops the drum unit and shows a “Replace Drum” message. A Brother HL-1110 drum reset...

How to Print a Self Test Page on Epson LX-350

If you are troubleshooting your Epson LX-350 dot matrix printer or simply want to check its performance, printing a self test page is one...

Enable USB port on Sharp MX-B350P, AR-B352PT, MX-B450P, AR-B452PT

By default the USB port is disabled on these Sharp models. To enable the USB port on the Sharp MX-B350P, AR-B352PT, MX-B450P and AR-B452PT,...

Turn on the toner save mode on Sharp AR-5516/5520 series

To reduce toner consumption you can turn on toner save mode on the Sharp AR-5516 / AR-5520 series. It is enabled through the machine’s...